CAKEWALK SONAR - Handling Stuck Notes

121
To Start and Stop Playback
Note:
The default behavior for the Now time when you click the Stop button is for it to
return to the Now time marker where playback began. If you want the Now time to
remain where it is when you stop playback, you can use the keyboard shortcut
Ctrl+Spacebar. If you want to change the default behavior, select Options-Global
and click the General tab. In the General tab, uncheck the On Stop, Rewind to
Now Marker option.
Handling Stuck Notes
Under MIDI, the events that turn notes on are separate from the events that stop
notes from playing. Normally, when you stop playback, SONAR attempts to turn
off all notes that are still playing. Depending on how your equipment is configured,
it’s possible for notes to get stuck in the “on” position. The Transport-Reset
command is used to stop all notes from playing. The Transport-Reset command
also stops feedback from input monitoring.
To Clear Stuck Notes
• Choose Transport-Reset, or click on the Large Transport toolbar.
To do this… Do this…
Start playback Press the Spacebar, click , or
choose Transport-Play
Stop playback Press the Spacebar, click , or choose
Transport-Stop
Rewind to the start of the project Click , press the w key, or choose
Transport-Rewind
Skip to the end of the project Click
Note:
You can control the MIDI messages that are sent by the Transport-
Reset command by changing the Panic Strength variable in the
CAKEWALK.INI file.