118
Other Ways to Set the Now Time
There are a variety of commands and keyboard shortcuts you can use to set the
Now time:
If your project has markers, you can use the Marker toolbar to set the Now time:
For more information about markers, see “Creating and Using Markers” on page
224.
Command... Shortcut... What it does...
Go-Time F5 Lets you enter the Now time in the
Position toolbar or in a dialog box
Go-From F7 Sets the Now time to the From time
(the start time of the current time
selection)
Go-Thru F8 Sets the Now time to the Thru time
(the end time of the current time
selection)
Go-Beginning Ctrl+Home Sets the Now time to the beginning
of the project
Go-End Ctrl+End Sets the Now time to the end of the
project
Go-Previous Measure Ctrl+PgUp Sets the Now time to the start of the
current measure if the Now time is
not on a barline, or to the start of the
previous measure if the Now time is
on a barline.
Go-Next Measure Ctrl+PgDn Sets the Now time to the start of the
next measure
To do this… Do this…
Skip to the next marker Click on the Markers toolbar (or press
Ctrl+Shift+PgDn).
Skip to the previous marker Click on the Markers toolbar (or press
Ctrl+Shift+PgUp).
Jump to any marker Click on the Markers toolbar to open
the Markers view. Click on the marker you
want to jump to in the Markers view.
To Next Page
Loading...