CAKEWALK SONAR - Transposing MIDI Notes

332
To Change Note Velocities
1. Select the data to be affected.
2. Choose MIDI Effects-Cakewalk FX-Velocity from the Process menu or
from the popup menu to open the Velocity dialog box.
3. Select options as described in the table above.
4. Click OK.
SONAR changes note velocities according to the specified options.
Transposing MIDI Notes
The Process-MIDI Effects-Cakewalk FX-Transpose command is a flexible
transposition feature. You can perform simple chromatic or diatonic
transpositions, transpose from one key to another, or define your own custom
transposition.
The transpose options are as follows:
Change gradually from
X% to Y%
Scales velocities by a gradually changing factor.
Limit range from X to Y Brings all velocities into the specified range.
Randomize by +/- X Adds or subtracts a random offset from each velocity.
You must also specify the maximum offset. You can
select this option in addition to one of the previous
options.
Tendency The tendency of the random offset to be lower or higher,
on a scale from -10 to 10.
Parameter/
Option...
Meaning...
Interval Specifies chromatic transposition. Transposes notes by
the specified number of steps.
Diatonic Specifies diatonic transposition. Transposes notes by the
specified number of scale steps within the specified
scale.
Key/Scale Specifies transposition from one scale and key to
another.
Custom Map Specifies custom transposition as defined by the map.