333
To Transpose MIDI Data
1. Select the data to be affected.
2. Choose MIDI Effects-Cakewalk FX-Transpose from the Process menu or
from the popup menu to open the Transpose dialog box.
3. Set the transposition options as described in the table above.
4. Click OK.
SONAR transposes the selected data according to the options you specified.
Offset For Interval transposition, the number of steps for the
transposition.
For Diatonic Transposition, the number of scale degrees
for the transposition.
For Key/Scale transposition, a number of octaves added
to each note after transposition.
Key For Diatonic transposition, the key in which the
transposition is made.
From, To For Key/Scale transposition, the starting and ending key
and scale.
Transposition Map A table of pitch mappings for the specified transposition.
You can select to show the pitches as note names or as
note numbers. For Diatonic and Key/Scale
transpositions, pitches not in the starting (from) key are
indented.
To Change a pitch mapping, click on a From pitch and
select a To pitch with the popup slider. If you change a
pitch mapping, the transposition type is automatically set
to Custom Map.
Constrain to Scale For Diatonic and Key/Scale transpositions, forces all
non-scale notes to be transposed to the nearest
appropriate scale tone.
To Next Page
Loading...