230
SONAR creates copies of the selected clips that are linked in the way you
chose.
To Unlink Linked Clips
1. In the Clips pane, select the clips you want to unlink.
2. Right-click on any selected clip and choose Unlink from the popup
menu. SONAR displays the Unlink Clips dialog box.
3. Choose the unlink option you want, and click OK.
SONAR unlinks the clips and updates the Clips pane accordingly. From
now on, any changes you make to one of the clips are applied only to
remaining linked clips, if any.
To Select the Clips That Are Linked to Another Clip
1. Select one or more clips in the Track view.
2. Right-click on any selected clip and choose Select All Siblings from
the popup menu.
SONAR selects any clip that is linked to one of the currently selected
clips.
Splitting and Combining Clips
SONAR provides several commands that are used to split and combine
clips. Specifically, you can:
• Split a clip into several smaller clips
• Create a new clip from a selected portion of an existing clip
• Combine adjacent or overlapping clips into a single, longer clip
The following table summarizes the commands you can use:
To do this… Use this
command…
Notes…
Split clips into parts Edit-Split Works on all selected clips.
You can also press the s key
to split all selected clips at the
Now Time.
Combine several clips
into one
Edit-Bounce to Clip(s) If the selected clips are in
separate tracks, one clip is
created for each track. All clip
automation is applied
destructively to the new clip.
To Next Page
Loading...