163
template with two MIDI and two audio tracks (called the Normal template). If you
are creating a new project that will contain only audio material, use the Audio
Only template. If you are creating a new project that will contain only MIDI
material, use the MIDI Only template.
You can create your own template files and use them as the basis for other new
projects. For more information, see “Templates” on page 517.
To Create a New Project File
1. Choose File-New to display the New Project File dialog box.
2. If you have the per-project audio folders option enabled, enter a file name, set
the folder where you want to store the new file, and set the folder where you
want to store the new file’s audio.
3. Choose a template from the list.
4. Click OK.
SONAR creates the new project file and displays it with the Track view open.
Setting the Meter and Key Signatures
By default, a new SONAR project is in 4/4 time and the key of C major. You can
change these settings to any desired meter or key. These settings apply to all the
tracks in a project. You cannot set different meter or key signatures for different
tracks.
The meter or key signature of a project can change at any measure boundary. To
insert changes in the meter or key signature, use the View-Meter/Key command to
display the Meter/Key view, or use the Insert-Meter/Key Change command.
To Next Page
Loading...