652
SONAR Can’t Find the Wavetable Synth
or MPU401
Follow this procedure:
1. Open the Audio Options dialog (Options-Audio command), and on the
Advanced tab, check the Always Use MME Interface, Even When WDM
Drivers Are Available option.
2. Click OK to close the dialog.
3. Close SONAR and reopen it.
4. Use the Options-MIDI Devices command to open the MIDI Devices dialog.
5. Highlight the Wavetable synth and/or the MPU401 (or whatever synth your
sound card contains).
6. Click OK to close the dialog.
Now your sound card synth and/or the MPU401 should appear in the drop-down
menus of the Output fields of your MIDI tracks.
To Next Page
Loading...