412
Inserting a ReWire Instrument
After you install your ReWire applications and reboot your computer, the names of
the ReWire applications appear in SONAR’s Insert menu under ReWire Devices,
and also in the Synth Rack view’s Insert button popup menu.
To Insert a ReWire Instrument
1. Open a SONAR project. Do not launch your ReWire application.
2. In the SONAR’s Synth Rack view, click the Insert button, and click ReWire
Devices to display the submenu of installed ReWire devices.
OR
Use the Insert-ReWire Devices command to display the submenu of installed
ReWire devices.
3. Click the name of the ReWire device you want to insert.
The Insert DXi Synth Preferences dialog appears.
4. Choose options from the Insert DXi Synth Preferences dialog according to the
following:
• If you want to create a MIDI track that uses the ReWire Instrument as an
output, check the Create These Tracks: MIDI Source Track checkbox.
• If you want to create a single audio track that acts as an output for
Output 1 of the ReWire Instrument, check the Create These Tracks: First
Synth Output (Audio) checkbox.
• If you want to create separate audio tracks for each of the ReWire
Instrument’s outputs, check the Create These Tracks: All Synth Outputs
(Audio) checkbox.
• If you want to use existing MIDI and audio tracks to play the ReWire
Instrument, uncheck all of the Create These Tracks options. SONAR adds
the ReWire Instrument to the audio track input and MIDI track output
menus. You need to set an existing audio track’s Input field to the ReWire
Instrument, and set an existing MIDI track’s Output field to the ReWire
Instrument.
• If you want to open the ReWire Instrument’s interface from this dialog,
check the Open These Windows: Synth Property Page checkbox (always
check this option: ReWire Instruments do not sound unless their
property pages are open).
• If you opened this dialog from the Insert menu and want to open the
Synth Rack view, check the Open These Windows: Synth Rack View
checkbox.
• If you want to open this dialog every time you use the Insert-ReWire
Instrument command, or click the Insert button in the Synth Rack view
and choose a synth from the popup menu, check the Ask This Every Time
option. If you always insert ReWire Instruments in the same way, you can
To Next Page
Loading...