133
Changing MIDI Track Settings in the Track Pane
You can change numeric values in MIDI tracks as shown in the following table:
For numeric fields, you can press and hold both mouse buttons to change the value
by increments of 10 (12, a full octave, for Key+).
Control How to change the value
Channel Click on the black arrow on the right of the control
and select a channel from the menu that appears, or
double-click on the control and enter a value.
Bank Click on the black arrow on the right of the control
and select a bank from the menu that appears, or
double-click on the control and enter a value.
Patch Click on the black arrow on the right of the control
and select a patch from the menu that appears, or
double-click on the control and enter a value.
Volume, Pan, Volume Trim,
Chorus and Reverb
Click on control and move your cursor left or right to
adjust values, or double-click on the control and
enter a value.
Key+ and Time+ Double-click the control or click on the black arrow on
the right of the control and enter a new value, or
double-click on the control and enter a value.
Input Click on the black arrow on the right of the control
and select a MIDI channel from the menu that
appears, or double-click on the control and select a
driver from the menu.
Output Click on the black arrow on the right of the control
and select a driver from the menu that appears, or
double-click on the control and select a driver from
the menu.
To do this... Do this...
Change the value by 1 Press the - or + key on your numeric
keypad, or click on the spinner control
Change the value by 10 (for Key+, by
12)
Press the [ or ] key, or right-click on the
spinner control
Enter a new value Press Enter and type the new value using
the keyboard, and press Enter
To Next Page
Loading...