138
3. To search for a patch containing specific text, click the Patch Browser button
to the right of the dropdown lists. You can also open the Patch Browser by
right-clicking a bank or patch control in the Track or Console views.
4. Click OK.
Another Way to Assign a Patch to a Track
1. Select the patch you want from the Patch dropdown.
To change the bank and patch settings for more than one track at a time, select the
tracks you want to change and choose Track-Property-Bank or Track-Property-
Patch.
To Insert a Bank/Patch Change
1. Highlight the track whose bank and patch you want to change by clicking on
the track number.
2. Set the Now time to the time at which you want the change to occur.
3. Choose Insert-Bank/Patch Change to display the Bank/Patch Change
dialog box.
4. Choose a bank and patch from the lists.
5. Click OK.
SONAR inserts a change in bank and patch. When you play back the project, the
initial bank and patch shown in the Track view will be used to the point at which
the bank/patch change takes place. You can remove a bank/patch change in the
Event List view.
To Choose Patches with the Patch Browser
1. In the Track view or Console view, right-click the patch name in the track
module you want to change patches in.
The Patch browser dialog box appears, displaying a list of all the Instrument
patch names that have been installed.
2. Search for a patch name, if desired, by filling in text in the search field at the
top of the dialog box.
3. When you find the right patch, click its name and click OK.
SONAR changes the patch of the track you selected.
To Next Page
Loading...