152
To Enable or Disable Video Playback
1. Open the Video view by choosing View-Video.
2. Right-click in the Video view and choose Animate.
If your computer is not fast enough to play back video efficiently, you can get better
performance by temporarily disabling video animation during playback.
To Set the Time Display Format
• Click the time display to cycle between MBT, SMPTE, Frames and None
Or
• Right-click in the Video view and choose an option from the Time Display
Format menu:
To Set the Video Display Format
Right-click in the Video view and choose an option from the Stretch Options
menu:
SONAR adjusts the video display according to the selected option. The stretch
To do this… Do this…
Select a time format Choose MBT, SMPTE, Frames or None
Change font or font color Choose Font and select new font
characteristics
Turn off the time display Choose None
To do this… Do this…
Display the video in its original size Choose Original Size
Stretch the video to fill the Video
view
Choose Stretch to Window
Stretch the video as much as
possible while preserving the
original aspect ratio
Choose Preserve Aspect Ratio
Make the video display as large as
possible, but only enlarge by
integral multiples
Choose Integral Stretch
Display the video in full screen
mode
Choose Full Screen
To Next Page
Loading...