190
5. Follow the instructions in the following table:
6. Click OK.
As always, you can use the Edit-Undo and Edit-Redo commands after you have
finished recording. Note that these commands erase or restore all the material you
recorded while in step record mode. Remember that Step Record always uses
the Sound on Sound (blend) record mode, regardless of the current record
mode.
To do this… Do this…
Record the next step Play the note(s) you want on your MIDI
instrument
Erase the most recent step Click Delete
Skip a step (add rests) Click Advance without playing any notes
Move forward or backward one
step
Click the scroll arrows in the scroll bar
Move forward or backward one
measure
Drag the indicator in the scroll bar
Jump to a particular Now time Enter the measure, beat, and tick number
next to the scroll bar
Change the step size Pick the step size you want from the Step
Size list
Change the note duration Pick the duration you want from the
Duration list
Stop recording and save your
work
Click Keep or press Enter
Stop recording and discard your
work
Click Close or press Esc
Advance to the next step With Auto Advance disabled, click the
Advance button
To Next Page
Loading...