219
To Nudge a Clip Up and Down
Use the following procedure to nudge a clip (in the Track view) or MIDI note (in
the Piano Roll view) up or down.
1. Select the clip or note you want to nudge.
2. Select Process-Nudge-Up to move the clip or note up or Process-Nudge-
Down to move a clip or note down.
Clips move up or down one track at a time. Notes move up or down one pitch at a
time.
To Change Nudge Settings
1. Select Process-Nudge-Settings to open the Nudge tab in the Global Options
dialog box.
2. In one of the three Nudge groups, select one of the following:
• Musical Time—Select a note length setting.
• Absolute Time—Select one of the following absolute time options and a
number in the first field
• Follow Snap Settings—Moves the clip or note by the current snap setting.
Absolute time setting… Description…
Seconds Whole seconds.
Milliseconds Thousands of a second.
Frames Number of frames. The default frame count is
30 frames per second. The number of frames
varies depending on the setting in the Project
Options dialog’s clock tab.
Samples A very small amount of time. For CD-quality
audio there are 44,100 samples per second, so
a value of 1 here would not move a clip by a
perceptible amount.
Ticks The number of ticks per quarter note varies
depending on the setting in the Project Options
dialog’s clock tab. The default setting is 960.
To Next Page
Loading...