255
Erase
Use the Erase tool to delete markers in the Markers bar.
Default All Markers
The Default All Markers tool restores all automatically generated markers to the
original position and enables all those that were disabled. Manually created
markers remain as is.
Previous Slice
Moves slice selection to the previous slice. Click on a slice to select it.
Next Slice
Moves slice selection to the next slice. Click on a slice to select it.
Show/Hide Gain Envelope
Clicking this button shows or hides the clip’s gain envelope. Each slice of the clip
has its own segment of the envelope, which you can adjust by dragging the
segment up or down.
Show/Hide Pan Envelope
Clicking this button shows or hides the clip’s pan envelope. Each slice of the clip
has its own segment of the envelope, which you can adjust by dragging the
segment up or down.
Show/Hide Pitch Envelope
Clicking this button shows or hides the clip’s pitch envelope. Each slice of the clip
has its own segment of the envelope, which you can adjust by dragging the
segment up or down.
Slice Gain
Changes the selected slice’s gain.
Slice Pan
Adjusts the selected slice’s pan. Negative is left and positive is right.
Slice Pitch
Adjusts the selected slice’s pitch. The first field is in half steps, the second field is
in cents.
Slicing Markers
There are two types of slicing markers in the Loop Construction view: automatic
and manual. Automatic markers appear in red and are automatically generated by
SONAR when you loop enable a clip. The one exception to this is if you import an
ACIDized wave file into SONAR. ACIDized files always appear with manual
slicing markers. Manual markers appear in purple. If you add a marker or move
an automatic marker, it turns purple to show you that it has been edited. For
information on editing slicing markers, see “To Edit the Slicing Markers in a
Groove Clip” on page 264.
To Next Page
Loading...