346
To Paint Notes Using the Pattern Brush Tool
1. Open a track in the Drum Grid pane or the Note pane.
2. In the Pattern Brush tool’s dropdown menu, select Note Duration.
3. In the Piano Roll View toolbar, select a note duration. This value is the
interval between notes when using the Pattern Brush tool.
4. Click the Pattern Brush tool to select it.
Your cursor should appear like this when in the Drum Grid pane.
5. Click where you want to begin placing notes and drag until you have inserted
all the notes you want.
6. Release the mouse button.
SONAR creates a series of notes, at equal intervals.
To Paint a Custom Pattern of Notes Using the Pattern Brush
Tool
1. Open a track in the Drum Grid pane.
2. In the Pattern Brush tool’s dropdown menu, select the custom pattern you
want to use. If you need to create a custom pattern, see “Creating Custom
Patterns” on page 347.
3. Click the Pattern Brush tool to select it.
Your cursor should appear like this when in the Drum Grid pane.
4. Click where you want to begin placing notes and drag until you have inserted
all the notes you want.
5. Release the mouse button.
To Use a Custom Pattern’s Note Velocities
1. Open a track in the Drum Grid pane.
2. In the Pattern Brush tool’s dropdown menu, select the custom pattern you
want to use. In the Pattern Brush tool’s dropdown menu, select Use Pattern
Velocities.
3. Click the Pattern Brush tool to select it.
Your cursor should appear like this when in the Drum Grid pane.
4. Click where you want to begin placing notes and drag until you have inserted
all the notes you want.
5. Release the mouse button.
To Next Page
Loading...