397
For the most natural-sounding results, choose low settings; transpose by no more
than a third or a fourth. Higher values, though, can be used for special effects.
To Apply Time/Pitch Stretch to Audio Data
1. Select the audio data to be affected.
2. Choose Audio Effects-Cakewalk-Time/Pitch Stretch from the Process
menu or from the popup menu to open the Cakewalk FX Time/Pitch Stretch
dialog box.
3. Set the time/pitch stretch parameters, as described in the table above.
4. Click OK.
SONAR applies the time/pitch stretch to the selected data.
Note:
This is a fast pitch shifter that uses minimal computation time.
To Next Page
Loading...