461
13. In the Mix Enables field, choose the elements you want to include in the
mixdown. If you want to exclude muted tracks and/or include only soloed
tracks, make sure Track Mute/Solo is checked.
Note: If you have patched a DXi (plug-in synth) into a track or bus, make sure
you check Track FX to include DXi’s that are patched into tracks, and check
Bus Returns to include DXi’s that are patched into buses.
Note: If you don’t check Track Automation. any initial volume and pan
settings in an exported track are ignored and the track’s audio data will be
exported at the level that exists in the track, with pan set to center. If you
don’t check Clip Automation, any trim settings are ignored during export. If
you don’t check Master Automation, any volume and balance settings at the
main outs are ignored.
14. If you want to save the settings you created in the Export Audio dialog, type a
name for them in the Preset window and then click the floppy disk icon that’s
next to the window.
15. Click Export.
The RealAudio settings dialog box appears.
16. Select options as described in the table below and click OK.
The audio is compacted and exported to the RealAudio file or files.
The RealAudio Settings dialog box lets you define the settings for the RealAudio
data in an exported file, as follows:
Option… Meaning…
Title Title of the file
Author Author of the file
Copyright Copyright statement
Enable Perfect Play Lets people with low-bandwidth connections download a higher
resolution version of the audio, at the expense of download time
Enable Mobile Play Lets people download file to a local drive for playback later
Target Connection
Rate
Choose as many different connection rates as your listeners may need.
Then your listeners can choose the rate that’s best for them when they
play your project.
Include RA 5.0
Compatible Stream
Ensures compatibility with older versions of RealAudio
Content Type Optimizes the data for specific content
To Next Page
Loading...