467
13. In the Mix Enables field, choose the elements you want to include in the
mixdown. If you want to exclude muted tracks and/or include only soloed
tracks, make sure Track Mute/Solo is checked.
Note: If you have patched a DXi (plug-in synth) into a track or bus, make sure
you check Track FX to include DXi’s that are patched into tracks, and check
Bus Returns to include DXi’s that are patched into buses.
Note: If you don’t check Track Automation. any initial volume and pan
settings in an exported track are ignored and the track’s audio data will be
exported at the level that exists in the track, with pan set to center. If you
don’t check Clip Automation, any trim settings are ignored during export. If
you don’t check Master Automation, any volume and balance settings at the
main outs are ignored.
14. If you want to save the settings you created in the Export Audio dialog, type a
name for them in the Preset window and then click the floppy disk icon that’s
next to the window.
15. Click Export.
The Cakewalk MP3 Encoder dialog appears.
16. Choose options and click OK.
The audio is compacted and exported to a file or files with the extension .
MP3.
To Export a Project as an OMF File
OMF (Open Media Format) files are designed for cross-platform compatibility.
1. Select File-Export-OMF.
The Export OMF dialog appears.
2. In the File Name field, enter a name for the file.
3. In the Save as Type field, select the OMF version you want to save the project
as. Version 1 is compatible with older applications. See your target
applications documentation for information on which version it supports.
4. In the Audio Packaging section, select Embed Audio Within OMF if you want
to save the audio in the OMF file, or Reference Audio Externally if you want to
store the audio in a subdirectory.
5. In the Audio Format section, select what file format you want your audio
saved in.
6. Check the Split Stereo Tracks into Dual Mono option if you want to save
stereo interleaved tracks as a pair of mono tracks.
7. Check the Include Archived Tracks option if you want to export the tracks in
your project that are currently archived.
To Next Page
Loading...