474
To mix in surround sound in SONAR, you must insert at least one surround bus.
A project can include multiple surround buses, but all surround buses in a project
use the same surround format (5.1, 7.1, etc.).
The project’s surround format is based on one of the following Surround Format
templates:
•2.0
•2.1
•LCR
• LRC+LFE
•LRS
• LFS+LFE
•Matrix UHJ
•QUAD
• 4.1 (SMPTE/ITU)
• Quad+LFE
• PanAmbio 4.1
• LCRS
• Surround (SMPTE/ITU)
• Surround Media
• LCRS+LFE
• 5.1 (Standard 3/2)
• 5.1 (Film/Alternative)
• 5.1 (Music/Alternative)
• 5.1 (SMPTE/ITU)
• 6.0 (Hexagon)
• 6.0 (Film/Alternative)
• 6.0 (Music/Alternative)
• 6.1 (Film/Alternative)
• 6.1 (Music/Alternative)
• 6.1 (SMPTE/ITU)
• 7.0 (Heptagon)
To Next Page
Loading...