49
To Enable MIDI Outputs
1. Select Options-MIDI Devices from the menu to open the MIDI Devices
dialog box.
2. In the MIDI Devices dialog in the Outputs field, arrange the outputs by doing
the following:
3. Click OK.
Note: If you have a large number of MIDI outputs enabled, you may occasionally
get MIDI transmission errors or an out-of-memory message. You can try either
deselecting some outputs, or lowering the number of Sysx buffers by using the
Options-Global command to open the Global Options dialog box: on the MIDI
tab, lower the value in the Number of Buffers field to 16.
To Enable Audio Outputs
1. Select Options-Audio from the menu.
The Audio Options dialog box appears.
2. Click on the Drivers tab in the Audio Options dialog box.
3. In the Output Drivers field, select the drivers you want enabled. All enabled
drivers appear highlighted.
4. Click OK.
To Set MIDI Outputs for Your Project’s Tracks
1. In the Track view, click the Output dropdown menu in a track. You may need
to enlarge the track to show the Output control: In Track 1, click the Restore
Strip Size button to expand the track. Also, you may have to click the All
tab control that’s at the bottom of the Track pane to display all the controls in
the track.
To do this… Do this…
Enable or disable a device Click on it—an enabled device appears highlighted; a
disabled device does not appear highlighted.
Move a device to the top of
the list
Highlight it, temporarily deselect all other highlighted
devices, and click the Move Selected Devices to Top
button.
To Next Page
Loading...