CAKEWALK SONAR - Page 579

579
will display drum notes as diamonds, and the Staff view will use percussion
notation.
To See the Assignment of Patch Name Lists to Banks
1. Expand the instrument definition by clicking the + sign next to the
instrument name.
2. Expand the Patch Names for Banks folder by clicking the + sign. The list
expands to show the bank numbers and the patch name list that is assigned to
each bank.
To Add a Bank or Change the Patch Names for a Bank
1. Drag a patch name list from the Names tree to the Patch Names for Banks
folder of the instrument you’re editing in the Instrument tree.
2. Enter a bank number, or enter –1 to indicate that this list of patch names
should be used as the default.
SONAR displays the updated banks and patch name lists. If necessary, SONAR
adds a new bank to the instrument definition.
To Remove a Bank or Patch Name List
1. In the Instrument tree in the Patch Names for Banks folder of the instrument
you’re editing, highlight the bank and patch names list.
2. Press the Del key, or right-click on the bank name and choose Delete from the
popup menu.
To Set or Clear the Drum Flag
• Right-click on the bank in the Instrument tree, and choose Drums from the
popup menu.
Instrument name
There are three defined
banks
The * indicates that this patch lis
t is
the default
This is the name of a patch
name list