616
To Configure MIDI Machine Control
1. Choose Options-Project, and click the Clock tab.
2. Select SMPTE/MTC as the clock source.
3. Click the MIDI Out tab.
4. Check the Transmit MMC box.
5. Enter the ID of the master timing device in the Time Code Master’s Unit ID
box.
6. Click OK.
MMC is now enabled.
To Disable MIDI Machine Control
1. Choose Options-Project, and click the MIDI Out tab.
2. Make sure the Transmit MMC box is not checked, and click OK.
MMC is disabled.
To Next Page
Loading...