622
To Create a New Project Using Per-project Audio
1. Select File-New.
The New Project File dialog appears.
2. Enter a filename in the Name field
The Location and Audio Path directories are automatically updated in the
following format:
•C:\default directory\project name. The default directory for new projects
is assigned in the Folders tab of the Global Options dialog. project name is
the project’s per-project folder name.
•C:\default directory\project name\Audio. The default directory for new
projects is assigned in the Folders tab of the Global Options dialog. project
name is the project’s per-project folder name, and Audio is the subfolder
where your audio data will be stored.
3. If you want, rename the Location and/or Audio Path directories.
4. Click OK.
To Save an Existing Project Using Per-project Audio
You may have older files that are not using per-project audio folders. If you want to
save these files using a per-project audio folder, use the following procedure:
1. Make sure that per-project audio folders is enabled in the Global Options
dialog.
2. Open the project whose audio you want to store using per-project audio.
3. Select File-Save As.
The Save As dialog appears.
4. If you want, change the name of your project.
5. In the Project Path field, enter the new directory where you want to save the
project, or use the Browse button to the right of the field to navigate to an
existing directory.
6. Check the Copy all audio with project option.
7. Click Save.
8. SONAR copies the project to the directory specified in the Project Path field
and stores all the project’s audio in the directory specified in the Audio Path
field.
Note: After you use the above procedure, you have two versions of the same
project.
To Next Page
Loading...