629
All of your audio settings are listed in the Audio Options dialog box, which you
open with the Options-Audio command. The following list summarizes all the
settings that the Wave Profiler sets. You can override all of them except what
audio drivers are listed in the Drivers tab:
• Input and output drivers
• DMA buffer sizes (in samples)
• Mixing latency
If you experience MIDI and audio synchronization problems during playback,
before contacting technical support, run the Wave Profiler and try the default
setting.
To Manually Run the Wave Profiler
1. Choose Options-Audio to open the Audio Options dialog box, and click the
General tab.
2. Click Wave Profiler.
The Wave Profiler examines each of your sound cards in turn, and displays the
name of the sound card it detected under the following possible headings:
Heading... What it means...
16 Bit Wave API No WDM drivers were detected.
Profiling using MME under Win9x and
WinME
32 Bit Wave API You may have chosen to force MME
even when WDM drivers are
available.
Note: Windows 2000 will use this API
when profiling MME.
WDM Kernel Streaming WDM drivers were detected.
To Next Page
Loading...