2-16
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 2 New and Changed Information
Cisco Unified Communications Manager, Release 8.5(1)
The Analyze Call Diagram window displays the corresponding SIP messages in the Call Flow Diagram.
Figure 2-1 Call Flow Diagram for Simple Call Scenario
Step 5 Click the tabs that you want to view. The following tabs are available:
• Call Flow Diagram—Displays the corresponding SIP messages in the Call Flow Diagram.
• Log File—Displays the entire log file.
• SIP Message—Appears only when the Include SIP Message check box is checked. Displays the
actual SIP message that gets logged into the SDI log file.
Step 6 The following table lists the messages that display when you move your mouse on each SIP message in
the Call Flow Diagram:
Displayed Messages Description
Sender Displays the IP address of the originating call.
SIP Call ID Displays the SIP call ID.
Message Label Displays the message type for the corresponding SIP message onto
which you move your mouse; for example, 200 OK, or180 Ringing.
Receiver Displays the IP address of the destination call.
Device Name Displays the name of the device.
To Next Page
Loading...
