9-23
Cisco Unified Communications Manager Managed Services Guide
OL-22523-01
Chapter 9 Vendor-Specific Management Information Base
Hewlett Packard MIBs
Power Supply
1
CPQHLTH-MIB
1.3.6.1.4.1.232.6.2.9.3.1.5
cpqHeFltTolPower
SupplyStatus
Clearing Value = 1
This value will be one of the following:
• other(1) The status could not be
determined or not present.
• ok(2) The power supply is
operating normally.
• degraded(3) A temperature sensor,
fan or other power supply
component is outside of normal
operating range.
• failed(4) A power supply
component detects a condition that
could permanently damage the
system.
NIC Errors CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.16
cpqNicIfPhysAdapter
GoodTransmits
Clearing Value = <0.5%
for 1 hour
Interface is experiencing excessive
errors
1.3.6.1.4.1.232.18.2.3.1.1.18 cpqNicIfPhysAdapter
BadTransmits
1.3.6.1.4.1.232.18.2.3.1.1.17 cpqNicIfPhysAdapter
GoodReceives
1.3.6.1.4.1.232.18.2.3.1.1.19 cpqNicIfPhysAdapter
BadReceives
NIC Utilization CPQNIC-MIB
1.3.6.1.4.1.232.18.2.3.1.1.16
cpqNicIfPhysAdapter
GoodTransmits
Clearing Value = <50%
for 1 hour
Interface is experiencing High
Utilization
1.3.6.1.4.1.232.18.2.3.1.1.18 cpqNicIfPhysAdapter
BadTransmits
1.3.6.1.4.1.232.18.2.3.1.1.17 cpqNicIfPhysAdapter
GoodReceives
1.3.6.1.4.1.232.18.2.3.1.1.19 cpqNicIfPhysAdapter
BadReceives
Table 9-13 HP Hardware Status Messages, MIBs and OIDs, MIB Object Names and Clearing Values, and
Object Responses (continued)
Cisco Unified CM Release 6.x
MCS-78xx Status MIB and OID
MIB Object Name and
Clearing Value Object Response
To Next Page
Loading...
Need help?
General