Crown RC 5500 series - Message Mode; Timer - Message Mode; Trip - Message Mode; Bdi - Message Mode

ELECTRICAL
ACCESS 123...System
134
M4.3-1055-002
04 Rev. 10/09
Message Mode
To enter the Message Mode, power up truck. With a
Message (for example Bdi = 70%) present on the dis-
play, press the right arrow to enter this menu. Press the
up/down arrows to scroll through the menus:
• Timer
• Trip
• Bdi
• Hours
• Odometer
Note: Message Mode is controlled by the Features
menu (F22). F22 allows the message mode to be lim-
ited to one of the menus listed above or allows all the
messages to be viewed. For more information, refer to
feature menu F22 Message Mode explanation later in
this section.
After truck power up, RC 5500 will be the message dis-
played until a different message mode menu is se-
lected.
Timer - Message Mode
This menu allows the operator to display a stopwatch.
To select this message, power up the truck. Press the
right arrow, use up/down arrows to display Timer.
Press the right arrow to enter the Timer menu. Use the
up/down arrows to scroll through choices:
• Stop
• Start
• Reset
Timer - Start
Press the enter/return button. The display will exit the
Message Mode and display;
Stopwatch (00:00:00), which will be incrementing.
Timer - Stop
Use the up/down arrows to display Stopwatch. Press
the right arrow to enter the Message Mode. Use the up/
down arrows to display Timer. Press the right arrow to
enter the Timer menu. Use the up/down arrows to dis-
play Stop, press the enter/return button. The display
will exit the Message Mode and show the Stopwatch
stopped, with whatever amount time accumulated (ex-
ample, 01:01:32).
Timer - Reset
Use the up/down arrows to display the Stopwatch.
Press the right arrow to enter the Message Mode. Use
the up/down arrows to display Timer. Press the right
arrow to enter Timer menu. Use the up/down arrows to
display Reset. Press the enter/return button. The dis-
play will exit the Message Mode. The Stopwatch will be
zeroed, and not counting (00:00:00).
Trip - Message Mode
This menu allows the operator to display the distance
traveled in either direction since the last reset, in feet.
To select this message, power up the truck. Press the
right arrow to enter the Message Mode. Use the up/
down arrows to scroll to Trip. Press the enter/return
button and the display will exit the Message Mode. The
display will show xxxx ft.
Trip - Reset
Press the right arrow to enter Message Mode. Use the
up/down arrows to display Trip. Press the right arrow to
display Reset. Press the enter/return button. The dis-
play will exit Message Mode and display distance trav-
eled reset (xxxx ft).
Bdi - Message Mode
This menu allows the operator to display the battery
percent of remaining charge. To select this message,
power up the truck. Press the right arrow to enter the
Message Mode. Use the up/down arrows to scroll to
Bdi. Press the enter/return button. The display will exit
the Message Mode and show (Bdi = XX%).
Crown 2007 PF15628-2 Rev. 10/09