47
M1.0-1055-052
LUBRICATION & ADJUSTMENT
Componentry
BRKS
Brake Switch
Location: brake pedal mounting bracket on left side.
Purpose: mechanical redundancy of RPS1.
Data: wired normally closed, open when operator de-
presses pedal.
Adjustment: refer to maintenance section.
BRK1
Brake Right Hand
Location: bottom center of truck front.
Purpose: park brake, provide 2/3 total braking force.
Data: 18VDC nominal operating voltage.
Adjustment: none required.
BRK2
Brake Left Hand
Location: bottom center of truck front.
Purpose: park brake, provide 1/3 total braking force.
Data: 18VDC nominal operating voltage.
Adjustment: none required.
Figure 15863
Figure 15864
Figure 15865
Crown 2007 PF15674-3
To Next Page
Loading...