373
M9.0-1055-005
02 Rev. 7/07
PLATFORM
Sideshifter
During installation, no lubrication is required for upper
bearings.
8. Lubricate lower bearings using general-purpose,
lithium-based chassis grease. Refer to Figure
16206.
Bearings
Bearing Lubrication
Lubricate both the upper and lower sideshifter bearings
with chassis grease every 300 hours or 4 weeks of op-
eration, whichever occurs first. If operating in contami-
nated environments, lubricate every week or as re-
quired.
Bearing Service
1. Carefully remove the sideshifter from the truck as
described in Sideshifter Removal and lay flat on a
pallet or workbench for servicing.
2. Remove roll pins and the cylinder/anchor bracket
assembly from the frame, as shown in Figure
16215.
Figure 16206
(1)
Upper Bearing Grease Fittings
(2)
Lower Bearing Grease Areas
(3)
Lower Mounting Hooks
Crown 2007 PF15717-5 Rev. 7/07
To Next Page
Loading...