221
M4.8-1055-011
03 Rev. 10/09
ELECTRICAL
Event Code 110
Event Code 110
ACCESS 1 Communication issue.
Step 1: Check voltage at ACCESS 1 CA215-17 (+) and
CA215-4 (-) and at CA403-3 (+) and BNEG.
• If: 35 to 38 Vdc.
– Then follow Event 300 procedures.
• If: Less than 35 Vdc.
– Then follow Event 303 procedures.
Figure 15783-01
Crown 2007 PF15665-11 Rev. 10/09
To Next Page
Loading...