LUBRICATION & ADJUSTMENT
Componentry
50
M1.0-1055-055
ECR1
LH Traction Motor Encoder
Location: inside left hand traction motor.
Purpose: provides speed and direction information to
Access 3 module.
Data: 11.3VDC, 64 pulses per revolution.
Adjustment: none required.
ECR2
RH Traction Motor Encoder
Location: inside right hand traction motor.
Purpose: provides speed and direction information to
Access 3 module.
Data: 11.3VDC, 48 pulses per revolution.
Adjustment: none required.
ECR3
Steering Command Encoder
Location: steer tiller.
Purpose: provide command to Access 7 for steering.
Data: 5VDC, 64 pulses per revolution.
Adjustment: none required.
Figure 15885
Figure 15886
Figure 15887
Crown 2007 PF15674-6
To Next Page
Loading...