Crown RC 5500 series - HN1

57
M1.0-1055-062
01 Rev. 3/07
LUBRICATION & ADJUSTMENT
Componentry
HN1
Horn
Location: bracket by left A pillar.
Purpose: provide operator controlled audible warning.
Data: 36VDC, 0.4 amp.
Adjustment: none required.
HNS
Horn Switch
Location: multi-task handle.
Purpose: allow operator to sound horn.
Data: wired normally open until operator depresses
horn button located on multifunction handle.
Adjustment: none required.
Figure 15903
Figure 15904
Crown 2007 PF15674-13 Rev. 3/07