Crown RC 5500 series - Overhead Guard

POWER UNIT PARTS
Overhead Guard
448
01.1-1055-001
03 Rev. 6/09
Overhead Guard
Figure 18332
Removal of the post will cause
the overhead guard to fail and
seriously injure the operator.
Do not remove the third post.
Required for OSHA 1910.178
and ITSDF/ANSI B56.1
WARNING
(a) Applies only to trucks with
overhead guard heights of
2108 mm (83 in) and
2197 mm (86.5 in)
(b) Torque Value
387 Nm (285 ft lb)
Crown 2007 PF15602-1 Rev. 6/09