SAFETY
General Maintenance Instructions
4
MA-04.0-002
05 Rev. 10/08
14. Modifications and additions which affect capacity
and safe truck operation shall not be performed by
the customer or user without manufacturers prior
written approval. Capacity, operation and mainte-
nance plates or decals shall be changed accord-
ingly.
– Adding electrical devices (radio, terminal,
lights, etc.) or changing existing components or
wiring can affect truck operation and could cause
an accident. Contact authorized Crown personnel
before adding to or changing the electrical system
in any way.
– For EE rated trucks, adding electrical devices
could cause a fire or explosion, as well as void the
EE rating. Written approval must be obtained from
Crown prior to adding electrical device(s). Prior to
use, inspection of installed device(s) must be per-
formed by an appropriate nationally recognized
testing laboratory (i.e. Underwriters Laboratories
Inc) or the Authority Having Jurisdiction (see NFPA
505).
15. Care shall be taken to assure that all replacement
parts are interchangeable with the original parts
and of equal quality to that provided in the original
equipment.
16. Be sure that any equipment added to the truck (ter-
minal, fan, clipboard, etc.) is positioned so that it
does not block your vision or interfere with safe and
efficient operation of the truck.
For further information pertaining to operating and
maintenance procedures:
• All trucks except Series B and Tow Tractors, refer
to current ASME B56.1.
• Series B trucks, refer to current ASME B56.10.
• Tow Tractors, refer to current ASME B56.9.
Crown 1976 PF 2821-2 Rev. 10/08
To Next Page
Loading...