INTRODUCTION
Introduction
22
ITD-1055-002
The data plate for the RC 5500 series truck is located
on the battery compartment wall and includes a model
number and truck data number. From these two num-
bers, you can identify the truck model, series, series
updates, determine relative size and performance, ca-
pacity and specific truck data. The following pages ex-
plain the model & truck data numbering system.
The example of the model number shown
(RC 5530 -30) is a RC 5500 series. It has an AC trac-
tion motor with a 462 mm (18.19 in) battery compart-
ment. It also has DC hydraulics and has a capacity of
1360 kg (3000 lbs).
*Actual rated capacity may vary, depending on special
equipment or modifications. Consult capacity plate lo-
cated on the overhead guard.
Figure 14936
RC5530 -30
Series Update
Significant change(s) to the product
that would not merit a new series
number (generation).
5 = AC traction as standard (only) offering.
*Capacity
30 = 1360 kg (3000 lbs)
35 = 1590 kg (3500 lbs)
40 = 1815 kg (4000 lbs)
1.5 = 1500 kg (3307 lbs)
1.6 = 1600 kg (3527 lbs)
1.8 = 1800 kg (3968 lbs)
Image Generator
RC - Rider Counterbalance
Relative Size or Performance
1 = 347 mm (13.66 in) battery compartment
2 = 405 mm (15.94 in) battery compartment
3 = 462 mm (18.19 in) battery compartment
4 = 522 mm (20.55 in) battery compartment
Series
Major technical and design changes
making the product a new and
improved generation.
Hydraulics System
0 = DC Hydraulics
5 = AC Hydraulics
Base or Custom
C = Custom (fleet) truck
No letter = Base truck
MODEL NUMBER EXAMPLE
Crown 2007 PF15672-2
To Next Page
Loading...