39
M1.0-1055-007
LUBRICATION & ADJUSTMENT
Lubrication and Adjustment
Refer to appropriate section of Service and Parts Man-
ual for additional information concerning inspection
and/or adjustment.
See Chart 1 and 2 for Lube Type designation explana-
tion (MA-1960-500).
Lubrication intervals must be changed to a frequency
that will minimize corrosion and wear on moving parts
for trucks operated in environments with excessive
dust and moisture, freezer/corrosion applications, etc.
Inspection Chart 2
Index Component
60 Days
250 Hours
12 Months
2000 Hours
I-10 Forks, Carriage, Load Backrest and Attachments Check
I-11 Sideshifter (Slides, Cylinders, Mounting, etc.) Check
I-12 Load Sense Switch Check
I-13 Hydraulic Line, Hose Fittings and Connections Check
I-14 Solenoid Valves Check
I-15 Column Rollers/Channels Check
I-16 Hose Take Up Cables Check
I-17 Lift Chain Check
I-18 Cylinder Guides, Slides and Stops Check
I-19 Carriage Cylinder and Mounting Hardware Check
I-20 Mast Cylinder(s) Check
I-21 Battery Retainers Check
Lubrication Chart 2
Index Component
Lube
Type
Quantity
60 Days
250 Hours
12 Months
2000 Hours
L-5 Sideshifter Zerks B As Req. Check
L-6 Mast Channels and Rollers E As Req. Check
L-7 Hoses, Cables and Pulleys H As Req. Check
L-8 Lift Chain G As Req. Check
Crown 2007 PF15681-7
To Next Page
Loading...