User Account Overview
Fixed Switch Configuration Guide 5-5
This example creates a new super-user account named “usersu” and enables it. The password for
this account is set and the configured login accounts are displayed. The new account is assigned
as the emergency access account and the system lockout settings are displayed. Then, the default
super-user account named “admin” is disabled.
C5(su)->set system login usersu super-user enable
C5(su)->set password usersu
Please enter new password: ********
Please re-enter new password: ********
Password changed.
C5(su)->show system login
Username Access State Aging Simul Local Login Access Allowed
Login Only? Start End Days
admin super-user enabled 0 0 no ***access always allowed***
ro read-only enabled 0 0 no ***access always allowed***
rw read-write enabled 0 0 no ***access always allowed***
usersu super-user enabled 0 0 no 00:00 24:00 sun mon tue wed
thu fri sat
guest read-only enabled 0 0 no 00:00 24:00 mon tue wed
C5(su)->set system lockout emergency-access usersu
C5(su)->show system lockout
Unsuccessful login attempts before lockout : 3
Duration of lockout : 15 minutes.
Period of inactivity before account lockout : 0 days
Lockout entire port upon failed logins : disabled
Ports currently locked out due to failed logins : none
Account assigned emergency-access from the console: usersu
C5(su)->set system login admin super-user disable
C5(su)->show system login
Username Access State Aging Simul Local Login Access Allowed
Login Only? Start End Days
admin super-user disabled 0 0 no ***access always allowed***
ro read-only enabled 0 0 no ***access always allowed***
rw read-write enabled 0 0 no ***access always allowed***
usersu super-user enabled 0 0 no 00:00 24:00 sun mon tue wed
thu fri sat
4. Assign the new super-user account as the
emergency access account.
set system lockout emergency-access
username
5. Display the system lockout settings show system lockout
6. Disable the default super-user account, admin set system login admin super-user
disable
Procedure 5-2 Configuring a New Super-User / Emergency Access User Account
Step Task Command(s)