Using the Equipment
3.13.9.2 Order Items
Option Name Card Number FAZ Number Marketing Code
No option cards are required for this feature
3.13.9.3 Control
Web
Front
Panel
SNMP
Serial
Remote
3.13.9.4 License Keys
Marketing Code Description FAZ Number License Key Name
RX8200/SWO/FSYNC FRAME SYNC LICENCE FAZ 101 0113/48 RX8200/SWO/FSYNC
3.13.9.5 Functional Description
The RX8200 contains a Frame-Sync input BNC (located on the rear of the unit).
This allows the user to synchronize the unit to a reference studio sync pulse such
that the output video (either in HD or SD) aligns to that of the studio feed.
The studio feed must be of the same frequency as the video service being decoded
by the RX8000:
• 50 Hz (field timing for interlaced or frame timing for progressive).
• 59.94 Hz (field timing for interlaced or frame timing for progressive).
• 60 Hz (field timing for interlaced or frame timing for progressive).
If the unit detects a signal mismatch then frame sync will not be acquired and the
unit will continue to run using its own internal sync.
For pixel accurate positioning of frame sync the controls used for Frame Sync Offset
can be used to manipulate this.
The Frame-Sync License option is required to use this functionality.
To Next Page
Loading...