Using the Equipment
Marketing Code Description FAZ Number License Key Name
RX8200/HWO/IP/OUT IP Transport
Stream Output
FAZ 101 0113/14 RX8XXX/SWO/IP/OUT
RX8200/SWO/DIR5/MSD Director by
Ericsson Multi-
service Decryption
FAZ 101 0113/28 RX8XXX/SWO/DIR5/MSD
RX8200/SWO/MSD DVB Common
Interface Multi-
service Decryption
FAZ 101 0113/46 RX8XXX/SWO/MSD
RX8200/SWO/BISS/MSD BISS Multi-service
CA
FAZ 101 0113/24 RX8XXX/SWO/BISS/MSD
RX8200/SWO/MP4/TRANS/HD HD 4:2:0
transcoding
FAZ 101 0113/63 RX8252/SWO/MPEG4/HD
RX8200/SWO/MP4/TRANS/HD/SD HD to SD 4:2:0
transcoding
FAZ 101 0113/64 RX8252/SWO/MPEG4/HD
RX8252/SWO/MPEG4/SD
RX8200/SWO/MP4/TRANS/SD SD 4:2:0
transcoding
FAZ 101 0113/65 RX8252/SWO/MPEG4/HD
RX8200/SWO/STAT_MUX Reflex™ by
Ericsson Statistical
Multiplexing
FAZ 101 0113/54 RX8252/SWO/STAT_MUX
RX8200/SWO/ENC/MPEG AAC to Layer II
audio transcode
FAZ 101 0113/155 RX8252/SWO/ENC/MPEG
RX8200/SWO/ENC/AC3 Dolby
®
Digital 5.1 to
2.0
FAZ 101 0113/67 RX8252/SWO/ENC/AC3
RX8200/SWO/PW Password
Protection of Web
Browser
FAZ 101 0113/51 RX8XXX/SWO/PW
3.20.1.5 Functional Description
The Ericsson RX8252 Program Transcoder allows legacy systems to continue
MPEG-2 operation whilst allowing the Programmer to distribute using MPEG-4 AVC
compression by offering both dense and high quality transcoding from MPEG-4 AVC
to MPEG-2.
The functionality is available under the Program Transcoder tab on the web
interface. This page enables viewing and editing of the various transcoding features
presented on the three sub-tabs: Preferences, Transport Stream and Services.
These are described in the following sections.
Note: Changes on the Program Transcoder specific pages generally are applied
immediately accept when changing the Service Details.
3.20.1.6 Configuring Preferences
This page enables preferences to be set for RX8252 transcoder operation.