Juniper QFX5110 Series User Manual

Table 14: Site Preparation Checklist
DatePerformed ByFor More InformationItem or Task
Environment
“Environmental Requirements and
Specifications for QFX3600 and
QFX3600-I Devices” on page 101
Verify that environmental factors such
as temperature and humidity do not
exceed device tolerances.
Power
Measure distance between external
power sources and device installation
site.
“AC Power Specifications for a
QFX3600 or QFX3600-I Device” on
page 162
“DC Power Specifications for a
QFX3600 or QFX3600-I Device” on
page 165
Calculate the power consumption and
requirements.
Rack or Cabinet
“Rack Requirements for a QFX3600
or QFX3600-I Device” on page 112
“Cabinet Requirements for a
QFX3600 or QFX3600-I Device” on
page 118
Verify that your rack or cabinet meets
the minimum requirements for the
installation of the switch.
“Clearance Requirements for Airflow
and Hardware Maintenance for a
QFX3600 or QFX3600-I Device” on
page 123
Plan rack or cabinet location, including
required space clearances.
Secure the rack or cabinet to the floor
and building structure.
Cables
94

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable