Juniper QFX5110 Series - Page 196

Table 52: Details of the AC Power Supplies in EX4300 Switches
1400 W AC
Power Supply
1100 W AC
Power Supply
715 W AC Power
Supply
350 W AC Power
SupplyDetails
JPSU-1400W-AC-
AFO
JPSU-1100-AC-
AFO-A
JPSU-715-AC-
AFO-A
•
JPSU-350-AC-
AFO-A
•
JPSU-350-AC-
AFI-A
Model number
Hot-insertable and
hot-removable
Hot-insertable and
hot-removable
Hot-insertable and
hot-removable
Hot-insertable and
hot-removable
Field-replaceable unit
(FRU) type
3.06 lb (1.39 kg)2.43 lb (1.1 kg)2.43 lb (1.1 kg)2.43 lb (1.1 kg)Power supply weight
1111Minimum installed in
chassis
2222Maximum installed in
chassis
Install in power
supply slots labeled
PSU 0 and PSU 1 in
the rear panel of
the chassis.
Install in power
supply slots labeled
PSU 0 and PSU 1 in
the rear panel of
the chassis.
Install in power
supply slots labeled
PSU 0 and PSU 1 in
the rear panel of
the chassis.
Install in power
supply slots labeled
PSU 0 and PSU 1 in
the rear panel of the
chassis.
Power supply slots
1111NumberAC appliance
Inlet
NOTE: Each
AC appliance
inlet requires a
dedicated AC
power feed.
IEC-320-C15IEC-320-C15IEC-320-C13IEC-320-C13Type
12–8 A
•
EX4300 switches
except
EX4300-48MP
and
EX4300-48MP-S
switches—12–6 A
•
EX4300-48MP
and
EX4300-48MP-S
switches—15 A
•
EX4300 switches
except
EX4300-48MP
and
EX4300-48MP-S
switches—11–5 A
•
EX4300-48MP
and
EX4300-48MP-S
switches—10 A
2 A
NOTE: EX4300-48MP
and EX4300-48MP-S
switches do not
support this power
supply.
Rating
InternalInternalInternalInternalFans
172