Name: Juniper QFX5110 Series
Brand: Juniper
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Ensure that you have the following parts and tools available:

•

A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack mounting screws,

for mounting the QFX3500 device on the rack.

To remove a QFX3500 device from a rack or cabinet:

1. Have one person support the weight of the device while another person uses the screwdriver to remove

the mounting screws that attach the chassis front-mounting brackets to the rack or cabinet.

2. Remove the QFX3500 device from the rack or cabinet.

3. Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the

rear of the rack or cabinet.

4. Place the removed screws and mounting blades in a labeled bag. You will need them when you reinstall

the chassis.

5. Transport the QFX3500 device to your desired new location.

Questions and Answers:

Need help?

Do you have a question about the Juniper QFX5110 Series and is the answer not in the manual?

Juniper QFX5110 Series Specifications

General