Juniper QFX5110 Series User Manual

Table 6: Components in 48-Port EX4300 Switches (continued)
Supported Uplink
Modules
Power Supply
Shipped by
DefaultFan Modules
Number
of PoE-
enabled
PortsBuilt-In PortsSwitch Models
2-port 40-Gigabit
Ethernet
QSFP+/100-Gigabit
Ethernet QSFP28
uplink module
(model number:
EX-UM-2QSFP-MR)
or 4-port 1-Gigabit
Ethernet/
10-Gigabit Ethernet
SFP+ uplink module
(model number:
EX-UM-4SFPP-MR)
NOTE: The switch
supports the 2-port
40-Gigabit Ethernet
QSFP+/100-Gigabit
Ethernet QSFP28
uplink module
(model number:
EX-UM-2QSFP-MR)
from Junos OS
Release 18.4R1
onwards. Starting in
Junos OS Release
19.3R1, you can
install two
100-Gigabit
Ethernet QSFP28
transceivers in the
uplink module. In
Junos OS Release
18.4R1 through
Junos OS Release
19.2R1, the uplink
module supported
only one
100-Gigabit
73

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable