Interactive SourceMeter® Instrument Reference Manual Appendix D: Model 2450 in a M
2450-901-01 Rev. B/September 2013 D-13
Model 2400 command
[:SENSe[1]]:AVERage:COUNt
[:SENSe[1]]:AVERage:COUNt?
Model 2450 command
[:SENSe[1]]:<function>:AVERage:COUNt (on page 6-43), where <function>
is
,
, or
.
Notes
This is now set for each measurement function.
Model 2400 command
[:SENSe[1]]:AVERage[:STATe]
[:SENSe[1]]:AVERage[:STATe]?
Model 2450 command
[:SENSe[1]]:<function>:AVERage[:STATe] (on page 6-44), where <function>
is
,
, or
.
Notes
This is now set for each measurement function.
Model 2400 command
[:SENSe[1]]:AVERage:TCONtrol
[:SENSe[1]]:AVERage:TCONtrol?
Model 2450 command
[:SENSe[1]]:<function>:AVERage:TCONtrol (on page 6-45), where
<function>
is
,
, or
.
Notes
This is now set for each measurement function.
Model 2400 command
[:SENSe[1]]:CURRent[:DC]:NPLCycles
[:SENSe[1]]:CURRent[:DC]:NPLCycles?
[:SENSe[1]]:RESistance:NPLCycles
[:SENSe[1]]:RESistance:NPLCycles?
[:SENSe[1]]:VOLTage[:DC]:NPLCycles
[:SENSe[1]]:VOLTage[:DC]:NPLCycles?
Model 2450 command
[:SENSe[1]]:<function>:NPLCycles (on page 6-48
), where
is
VOLTage[:DC], CURRent[:DC], or RESistance.
[:SENSe[1]]:<function>:NPLCycles?
Notes
If you send [:SENSe[1]]:NPLCycles, it sets NPLCs for all functions.
Model 2400 command
[:SENSe[1]]:CURRent[:DC]:PROTection[:LEVel]
[:SENSe[1]]:CURRent[:DC]:PROTection[:LEVel]?
Model 2450 command
:SOURce[1]:<function>:<x>LIMit[:LEVel] (on page 6-71)
Notes
Model 2400 command
[:SENSe[1]]:CURRent[:DC]:PROTection:RSYNchronize
[:SENSe[1]]:CURRent[:DC]:PROTection:RSYNchronize?
[:SENSe[1]]:VOLTage[:DC]:PROTection:RSYNchronize
[:SENSe[1]]:VOLTage[:DC]:PROTection:RSYNchronize?
Model 2450 command
Notes
Range synchronization is always turned on in Model 2450
Model 2400 command
[:SENSe[1]]:CURRent[:DC]:PROTection:TRIPped?
Model 2450 command
:SOURce[1]:<function>:<x>LIMit[:LEVel]:TRIPped? (on page
6-72)
Notes
To Next Page
Loading...
