Keithley 2450 - Page 858

Model 2450
Interactive SourceMeter® Instrument Reference Manual Appendix D:
Model 2450 in a Model 2400 application
2450-901-01 Rev. B/September 2013 D-15
Model 2400 command
[:SENSe[1]]:DATA[:LATest]?
Model 2450 command
Not available
Notes
Retrieve buffers instead; see TRACe subsystem (on page 6-107).
Model 2400 command
[:SENSe[1]]:FUNCtion:CONCurrent
[:SENSe[1]]:FUNCtion:CONCurrent?
Model 2450 command
Not available
Notes
To do a similar action, set :SOURce[1]:<function>:READ:BACK (on page 6-77)
and store both a measure and source values in the reading buffer.
Model 2400 command
[:SENSe[1]]:FUNCtion:OFF
[:SENSe[1]]:FUNCtion:OFF?
Model 2450 command
Not available
Notes
Only one measurement function is active at a time.
Model 2400 command
[:SENSe[1]]:FUNCtion:OFF:ALL
Model 2450 command
Not available
Notes
Only one measurement function is active at a time.
Model 2400 command
[:SENSe[1]]:FUNCtion:OFF:COUNt?
Model 2450 command
Not available
Notes
Only one measurement function is active at a time.
Model 2400 command
[:SENSe[1]]:FUNCtion[:ON]
[:SENSe[1]]:FUNCtion[:ON]?
Model 2450 command
[:SENSe[1]]:FUNCtion[:ON] (on page 6-49)
[:SENSe[1]]:FUNCtion[:ON]?
Notes
Does not support a list parameter in the Model 2450
Model 2400 command
[:SENSe[1]]:FUNCtion[:ON]:ALL
Model 2450 command
Not available
Notes
Only one measurement function is active at a time.
Model 2400 command
[:SENSe[1]]:FUNCtion[:ON]:COUNt?
Model 2450 command
Not available
Notes
Only one measurement function is active at a time.
Model 2400 command
[:SENSe[1]]:FUNCtion:STATe?
Model 2450 command
[:SENSe[1]]:FUNCtion[:ON]?
Notes
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]? queries the active measurement function.
Model 2400 command
[:SENSe[1]]:RESistance:HOLDoff
[:SENSe[1]]:RESistance:HOLDoff?
Model 2450 command
Not available
Notes