Keithley 2450 - Page 863

Appendix
D: Model 2450 in a Model 2400 application Model 2450 Interactive SourceMeter® Instrument
Reference Manual
D-20 2450-901-01 Rev. B/September 2013
Model 2400 command
:SOURce[1]:LIST:VOLTage
:SOURce[1]:LIST:VOLTage?
Model 2450 command
:SOURce[1]:SWEep:<function>:LIST (on page 6-85)
Notes
In the Model 2450, this sets up a list of customer values for a sweep.
Model 2400 command
:SOURce[1]:LIST:VOLTage:APPend
Model 2450 command
:SOURce[1]:SWEep:<function>:LIST (on page 6-85)
Notes
In the Model 2450, this setting is set as part of the configuration list that is
created by the sweep command.
Model 2400 command
:SOURce[1]:LIST:VOLTage:POINts?
Model 2450 command
Not available
Notes
In the Model 2450, this setting is set as part of the configuration list that is
created by the sweep command.
Model 2400 command
:SOURce[1]:LIST:VOLTage:STARt
:SOURce[1]:LIST:VOLTage:STARt?
Model 2450 command
:SOURce[1]:SWEep:<function>:LIST (on page 6-85)
Notes
In the Model 2450, this setting is set as part of the configuration list that is
created by the sweep command.
Model 2400 command
:SOURCe[1]:MEMory:POINts
:SOURCe[1]:MEMory:POINts?
Model 2450 command
Not available
Notes
You can achieve functionality that is close to source memory with the Model
2450 configuration lists. See Configuration lists (on page 3-33) for information.
Model 2400 command
:SOURCe[1]:MEMory:RECall
Model 2450 command
Not available
Notes
You can achieve functionality that is close to source memory with the Model
2450 configuration lists. See Configuration lists (on page 3-33) for information.
Model 2400 command
:SOURce[1]:MEMory:SAVE
Model 2450 command
Not available
Notes
You can achieve functionality that is close to source memory with the Model
2450 configuration lists. See Configuration lists (on page 3-33) for information.
Model 2400 command
:SOURCe[1]:MEMory:STARt
:SOURCe[1]:MEMory:STARt?
Model 2450 command
Not available
Notes
You can achieve functionality that is close to source memory with the Model
2450 configuration lists. See Configuration lists (on page 3-33) for information.
Model 2400 command
:SOURce[1]:SOAK
:SOURce[1]:SOAK?
Model 2450 command
Not available
Notes