Keithley 2450 - Page 865

Appendix
D: Model 2450 in a Model 2400 application Model 2450 Interactive SourceMeter® Instrument
Reference Manual
D-22 2450-901-01 Rev. B/September 2013
SOURce2 subsystem
Model 2400 command
:SOURce2:BSIZe
:SOURce2:BSIZe?
Model 2450 command
Not available
Notes
All digital inputs and outputs on the Model 2450 are general; you can choose as
appropriate. See Digital I/O (on page 3-62) for information.
Model 2400 command
:SOURce2:CLEar:AUTO
:SOURce2:CLEar:AUTO?
Model 2450 command
Not available
Notes
Model 2400 command
:SOURce2:CLEar:AUTO:DELay
:SOURce2:CLEar:AUTO:DELay?
Model 2450 command
Not available
Notes
Model 2400 command
:SOURce2:CLEar[:IMMediate]
Model 2450 command
Not available
Notes
Model 2400 command
:SOURce2:TTL[:LEVel][:DEFault]
:SOURce2:TTL[:LEVel][:DEFault]?
Model 2450 command
Not available
Notes
All inputs and outputs on the Model 2450 are general; you can choose as
appropriate. See Digital I/O (on page 3-62) for information.
Model 2400 command
:SOURce2:TTL[:LEVel]:ACTual?
Model 2450 command
Not available
Notes
All inputs and outputs on the Model 2450 are general; you can choose as
appropriate. See Digital I/O (on page 3-62) for information.
Model 2400 command
:SOURce2:TTL4:BSTate
:SOURce2:TTL4:BSTate?
Model 2450 command
Not available
Notes
All inputs and outputs on the Model 2450 are general; you can choose as
appropriate. See Digital I/O (on page 3-62) for information.
Model 2400 command
:SOURce2:TTL4:MODE
:SOURce2:TTL4:MODE?
Model 2450 command
Not available
Notes
All inputs and outputs on the Model 2450 are general; you can choose as
appropriate. See Digital I/O (on page 3-62) for information.
STATus subsystem
Model 2400 command
:STATus:MEASurement:CONDition?
Model 2450 command
Not available
Notes
Use the questionable register to emulate this register; see the STATus
subsystem (on page 6-89) for information.