36 User’s Manual TOS93 Series
Installation | Connection for Earth Continuity Tests
2
Connect the test lead’s current output cable (red) to the EARTH CONTINUITY
OUTPUT HI terminal and the voltage measurement cable (red) to the SENSING HI
terminal.
This completes the connections.
Examples of how to connect test leads to the EUT
Power output cable (red)
Voltage measurement cable (red)
To the LO
terminal
To the HI
terminal
To the HI
terminal
To the HI
terminal
To the LO
terminal
EUT EUT EUT
Ex: Between the protective
ground terminal and
grounded enclosure
Ex: Between the protective
conductor terminal and
grounded enclosure
Ex: Between the grounding
terminal of the power cord
and grounded enclosure
To Next Page
Loading...
