Combination: Menu Command Copy Tone Adjust
187
Resample Combination Play: Makes settings so you can
play a combination and resample your performance.
REC Audio Input: Makes settings so you can sample an
external audio source while listening to yourself play a
combination.
For more information, please see “Auto Sampling Setup” on
page 109.
Copy Tone Adjust
Copy Tone Adjust is available on the Control Surface page
when CONTROL ASSIGN is set to TONE ADJUST.
This command replaces the Tone Adjust settings of the
selected Timbre (Combination mode) or Track (Sequencer
mode) with those of any other Program, Timbre, or Track.
1. Select the Timbre (Combination mode) or Track
(Sequencer mode) whose Tone Adjust settings you
want to replace.
For a timbre, access the Combi P0: Play– Control Surface
page, and select the Control Assign Tone Adjust Timbre.
For a track, access the Seq P0–2: Play/REC– Control Surface
page, and select the Control Assign Tone Adjust Track.
2. Select “Copy Tone Adjust” to open the dialog box.
3. Use From to select the Program, Combination, or Song
from which to copy.
You can also use the front-panel BANK keys to select the
desired bank.
4. If you’ve selected a Combination or Song, select a spe-
cific Timbre or Track as well.
5. Choose either All or Assignments Only to select the
Tone Adjust parameters that you want to copy.
All: This copies both the Tone Adjust parameter
assignments and values.
Assignments Only: This copies only the Tone Adjust
parameter assignments, without the values.
6. To execute the Copy Tone Adjust command, press the
OK button. To exit without copying the controls, press
the Cancel button.
Reset Tone Adjust
Reset Tone Adjust is available on the Control Surface page
when CONTROL ASSIGN is set to TONE ADJUST.
This command affects only the selected Timbre or Track, as
opposed to the entire Combination or Song. It resets the
Tone Adjust settings for all of the Track/Timbre’s, Switches,
and Sliders to their default values.
1. Select the Timbre (Combination mode) or Track
(Sequencer mode) to reset.
For a timbre, access the Combi P0: Play– Control Surface
page, and select the Control Assign Tone Adjust Timbre.
For a track, access the Seq P0–2: Play/REC– Control Surface
page, and select the Control Assign Tone Adjust Track.
2. Select “Reset Tone Adjust” to open the dialog box.
3. Use the To field to specify how the Tone Adjust param-
eters will be reset.
All Off: All parameters will be reset to Off.
Default Setting: The parameters will be reset to the default
settings for the corresponding program type (EDS or EXB-
RADIAS option).
4. To execute the Reset Tone Adjust command, press the
OK button. To exit without resetting the controls, press
the Cancel button.
Copy Drum Track
This command copies the drum track settings of the
specified Program, Combination, or Song.
For more information, please see “Copy Drum Track” on
page 112.
Erase Drum Track Pattern
This erases the drum track pattern you specify.
For more information, please see “Erase Drum Track
Pattern” on page 112.
Copy Pad Setup
Copy Pad Setup is available on the Pads tab of the DT/XY/
Ctrls page.
This command copies the Pad from a specified program,
combination/timbre, or song.
For more information, please see “Copy Pad Setup” on
page 112.
To Next Page
Loading...
Need help?
General
