14
pressthe lefmost buttonofthe STYLEsection. Ames‐
sage window will appear, showing the name of the
originalbank.Relea
setheSHIFTbuttontoexitthewin‐
dow.
There is a shor
tcut to see all pages of the selected
bank.To cycle all pages for a selected bank, press the
bank’sbuttonunti
lyouseethepagethatyou’relooking
for.
Thesebuttonsdoubleasanumeri
ckeypadoncertain
pages(see“Se
lectingaSongcomposingit
sprogressive
number”onpage70).
16 FADE IN/OUT
WhentheStyle
stoped,pressthisbuttontostartitwith
a vol
ume fade‐in (the volume goes from zero to the
maximum).
When the Style is pl
aying,press this button to stop it
with a
volume fade‐out (the volume gradually
decreases).
You don’
t need to press START/S T
OP to start or stop
theStyle.
17 VARIATION 1–4 (NOTE LENGTH) buttons
Eachofthese buttonswillselect oneofthe fourvaria‐
tions of the current St
yle. Each va
riation can vary in
patternsandsounds.
ThesebuttonsdoubleasaNOTELENGTHfunction
fortheSongmode(seechapter13).
18 FILL 1–2 (NOTE L
ENGTH) buttons
Thesetwobuttonstriggerafill‐in.Pressthemtwice(LED
blinking) to let them play in loop, and select any other
Styleelement(Fill,Intro,Variation…)toexittheloop.
They also double as a NOTE LENGT H function for
theSongmode(seechapter13).
19 COUNT IN / BRE
AK
WhiletheStyle is not running, press this button, then
press ST
ART/STOP. This combination triggers a one‐
barinitialcount,thentheStylestartsplaying.
WhiletheSt
yleisalreadyinplay,thisbu
ttontriggersa
break(anemptymeasurebeginningwithakick+crash
shot).Pressittwicetoletitplayinloop,andselectany
otherStyleelement(Fill,Intro,Variation…)toexitthe
loop.
20 ENDING 1–2 (DOT, TRIPLET) buttons
WhiletheSt
yleisrunning,thesetwobuttonstriggeran
Ending,andst
optheStyle.Pressoneofthem,andthe
Style will stop running with an Ending. If pressed
while the Style is stopped, they act as an additional
coupleofIntros.
Press them twi
ce (LED blinking
) to let them play in
loop, and select any other Style element (Fill, Intro,
Variation…)toexittheloop.
ENDING1 also doubles as a DOT function, and
ENDING2doubles asa
TRIPLETfunction,tobeused
inSongmode(seechapter13).
Note
:Ending1playsashortsequencewithdifferentchords,
whileEn
ding2playsonthelastrecognizedchord.
21 INTRO 1–2 buttons
ThesetwobuttonssetthearrangerinIntromode.After
pressingoneofthesebuttons,starttheStyle,anditwill
begin wi
th the selected intro. The INTRO LED will
automaticallygooffattheendoftheintro.
Press them twi
ce (LED blinking)
to let them play in a
loop, and select any other Style element (Fill, Intro,
Variation…)toexittheloop.
Note:Intro 1 plays a short sequence withdifferentchords,
whi
leIntro2playsonthelastrecognizedchord.
22 START/STOP
StartsorstopstheSt
ylethat’srunning.
You can reset all ‘frozen’ notes and contr
ollers
on the microARRANGER and any instrument con‐
nectedtoit
sMIDIOUT,byusingthe“Panic”keycom‐
bination. Jus
t press SHIFT + START
/STOP to stop all
notesandresetallcontrollers.
23 SYNCHRO START / STOP (DELETE)
This button tu
rns the Synchro Startand Synchro Stop
functionsonor
off.Pressitrepeatedlytoturnthefunc‐
tions on or off. The LEDs will cycle in this order:
START
START+STOPOFF.
STARTLE
DON
When
thisLEDis
lit‐up,justplayachord
in the chord recogn
ition area (usually
under the split point, see “CHORD
SCANNINGsecti
on”onpage17)toauto‐
matically start the St
yle running. If yo
u
like, you can turn one of the INTROs on
beforestartingtheStyle.
To Next Page
Loading...
Need help?
General
